TODAS AS LIGAS   >  AÇO INOXIDÁVEL   >  PRODEC® 316/316L

PRODEC® 316/316L       ESPECIFICAÇÕES TÉCNICAS

PRODEC 316/316L is an improved version of standard 316L for improved machinability and outstanding uniformity. The consistency and optimal machinability of PRODEC permits machining at higher speeds and feeds, producing superior quality parts for the lowest total cost. It should be considered for automatic screw machines where extensive machining is required.

PRODEC 316/L provides good resistance to pitting and crevice corrosion in environments containing chlorides and other halides. Although improvements in machinability in the past have been associated with reduced corrosion resistance, PRODEC 316/316L provides corrosion resistance consistent with standard 316L stainless steel. Commonly, PRODEC 316/316L is dual certified as PRODEC 316L and PRODEC 316 because the material meets both the lower carbon limit of 316L and the slightly higher strength of 316.

PRODEC 316/316L is readily welded by a full range of conventional welding procedures except oxyacetylene. AWS E316L/ER316L and other low carbon filler metals with molybdenum content higher than that of the base metal should be used with PRODEC 316/316L stainless steel.


Chemical Composition, %

 

 

Cr

Ni

C

Mn

P

S

Si

Mo

N

Fe

MIN

16.0

10.0

-

-

-

0.015

-

2.0

-

-

MAX

18.0

14.0

0.03

2.0

0.04

0.03

0.75

3.0

0.1

Balance

 

Specifications

 

UNS: S31600, S31603 W. Nr./EN: 1.4401, 1.4404 ASTM: A 276, A 479 AMS: 5648, 5653

 

PRODEC® is a registered trademark of Outokumpu


SOLICITAR UM ORÇAMENTO